Your drain has blocked again, and now someone has quoted you for a whole new sewer line. You may already be picturing a trench down the backyard. Here’s the short answer on sewer repair vs replacement: most damaged lines need a repair, not a full replacement.
The only reliable way to know which one you need is a CCTV camera inspection. A small camera on a flexible cable travels through the pipe and sends live pictures to a screen. It shows how many sections are damaged and what kind of damage you’re dealing with. That footage should decide what happens next, not a guess.
As a rule, one minor crack in one spot means a local repair. Damage in several places, roots along the line or collapsed joints usually mean replacement. Below, we explain how to read those signs and what each fix involves. We also show you how to avoid paying for more work than your drains need.
Most sewer problems need a repair, and only a camera can tell you which ones don’t
We use a CCTV drain camera on sewer jobs right across Melbourne, from Coburg and Brunswick to Camberwell and Kew. One lesson keeps coming back. The symptom you notice at home, like a slow toilet or a gurgling floor waste, rarely tells you how bad the damage is.
Two houses with the same symptoms can need completely different fixes. One might have a single root poking through one joint. The house next door might have a pipe that has cracked and sunk in three places.
The short answer: count the damaged sections and name the type of damage
When we review footage with a homeowner, the decision comes down to two questions:
- How many sections are affected? Is it just one, or several along the run?
- What type of damage is it? Is it a small crack, a displaced joint, root entry or a collapse?
A single minor issue can often be fixed in one spot. Damage across several zones, roots along the run or collapsed joints usually point to full replacement. Patching one spot on a line that’s failing in five places just means paying again next year.
Why a quote without camera footage should make you wary
Diagnosis comes first. Any advice to repair or replace should follow from what the footage shows. If someone quotes you for a full replacement after a quick look at your gully, ask to see the vision.
A plumber you can trust will happily show you the fault on screen. They should also tell you how far along the line it sits. That way you can picture exactly where any work would happen in your yard.
The symptoms that point to a bigger problem than one blockage
Some warning signs are just a passing nuisance. Others tell you the pipe itself is starting to fail, and those are the ones worth writing down.
Repeated blockages matter more than a single leak
Blockages, more than leaks on their own, are what usually push a line towards repair or replacement. A one off blockage is often just a build up of wipes or fat.
When it keeps coming back in the same place, something physical is probably catching the waste. That could be a root mass, a dropped joint or a crack with a raised lip. Many older Melbourne homes have clay (earthenware) sewer pipes laid in short lengths. The joints between those lengths are the weak points, so that’s where roots most often find their way in.
On the screen, it’s easy to spot. Fine roots show up as a hairy curtain hanging from the top or side of a joint. Older root masses can fill most of the pipe. A dropped joint looks like a small step where one length sits lower than the next, and waste snags on that edge every time you flush.
Example: the same drain clearing three times in a year
This is a hypothetical example to show how the pattern plays out, not a real job. Picture a family in an older house in Coburg who has the main drain cleared in February, again in June and once more in November. Every visit costs them money, and every time they hear “all clear”. Nobody films the line.
Now imagine the camera finally goes in and finds roots at two joints and a sagging section that holds water. Clearing it was only ever a temporary fix. Filming it after the second blockage would have let the family make a proper decision months earlier, and they could have skipped the third call out.
It doesn’t have to drag on like that. Here’s a real one. A customer left us a Google review about a stubborn sewer line blockage at their place. A member of our team called them within an hour of their online enquiry and booked the job the same day. The next day, one of our plumbers came out and fixed the sewer shaft in their backyard. A sewer shaft is the access point where the line can be reached from above ground, and getting to it quickly is often what turns a messy week into a one day fix.
Checklist of warning signs to note before you call a plumber
If you notice anything on this list, write it down with the date:
- The same fixture blocks more than once in a few months
- Several fixtures drain slowly at the same time
- The toilet or shower gurgles when another fixture drains
- Water rises or overflows at the outdoor gully
- You can smell sewage in the yard or near the house
- Soggy patches or unusually green grass appear along the route of the line
- Large trees grow close to where the line runs
Notes like these help your plumber work out where to look and what they’re likely to find. They also save time on the day, because the camera can go straight to the likely trouble spot.
Sewer repair vs replacement comes down to what the inspection finds
Once you have the footage, the choice gets much clearer. There are three broad options, and each one suits a different kind of damage.
When a local spot repair is enough
A spot repair fixes one short section of pipe. It’s the right call for a single crack, one displaced joint or one small patch of root entry, as long as the rest of the line looks sound on camera. It’s the least disruptive option, so rule it in or out before anything else.
When relining is the sensible middle option
Relining forms a new pipe inside the old one. It’s usually done through existing access points, so there’s little digging. It suits lines that have cracks or minor root entry but still hold their round shape.
Relining cannot fix a section that has fully collapsed, because there’s nothing left for the liner to follow.
When full replacement is the only fix that will hold
Replacement makes sense once the damage runs along much of the line. Think heavy root intrusion at many joints, several collapsed sections or a pipe that has lost its shape. At that point, repairs and liners are money spent on a line that’s already finished.
Decision table: damage found, likely fix, what it means for your yard
What the camera finds
Likely fix
What it means for your yard
One minor crack or one displaced joint
Local spot repair
Small dig at one point, or a localised liner
Cracks or light root entry in a few joints, line still round
Relining
Usually works from existing access points, little digging
Roots entering along much of the line
Relining or replacement, depending on its shape
Depends on access and how far the roots have spread
One or more fully collapsed sections
Replacement of those sections, at least
Digging at the collapse is often needed
Damage in several zones plus collapse
Full replacement
Trenchless pipe pulling or an open trench
Replacement does not automatically mean a trench through your garden
This is the part that worries most people. A full replacement used to mean digging up the entire route, but that’s no longer always the case.
How trenchless methods avoid digging up the whole line
Trenchless methods let the work happen through a few access points rather than one long trench. In many cases your paving, driveway and garden beds can stay exactly where they are.
Pipe pulling: a new pipe drawn through the old one
One trenchless approach pulls a brand new pipe along the path of the old one. It needs far less digging and makes much less mess. That’s why a tree growing above the line can sometimes stay standing. Whether it suits your property depends on the soil, the access and the current condition of the pipe.
When open excavation is still the right call
Sometimes digging really is the honest answer. A badly collapsed line, no workable access points or a run that needs its slope corrected may all call for an open trench.
If you’re told you need one, ask why trenchless won’t work. A clear, specific answer is a good sign. A vague one is a reason to get a second opinion.
Follow the escalation order and you avoid paying for more than you need
Think of it as a ladder. You start with the smallest fix and only climb a rung when the lesser fix won’t hold.
Step 1: diagnose with a CCTV drain camera
A CCTV drain camera inspection shows you the inside of the line, the type of damage and how far along it sits. Every decision after this follows from that footage.
Here’s how we go about it. We feed the camera into the line through an existing access point, such as a gully or inspection opening. The picture comes up live on a screen, so you’re welcome to watch along with us. As the camera moves, we note how far into the line each fault sits. That tells us where on your property any repair would need to happen, which is the detail you need when you’re comparing quotes.
Step 2: clean the line so the real damage shows
Roots, grease and debris can hide cracks and joints. Clean the line properly, then film it again. You’ll see what’s actually broken rather than what’s simply dirty.
Steps 3 to 5: repair, reline, then replace only if lesser fixes fail
With clean footage in hand, you work your way up. Repair the broken spot if it’s isolated. Reline if the damage is wider but the line still holds its shape. Replace only when neither of those will last.
The common mistake: replacing before the pipe has been cleaned and filmed
This is the mistake we’d most like you to avoid. A line packed with roots can look far worse on screen than it really is once it’s clean. Agreeing to a replacement based on footage of a blocked, uncleaned pipe means deciding before you have the full picture. After cleaning, that same line may need only one repair.
Our advice is simple: insist on clean footage before you commit to the biggest job.
What you can check yourself and what needs a licensed plumber
There are a few useful things you can do before anyone arrives. There are also a few things you should leave well alone.
Safe things to do today: note symptoms, check the overflow relief gully, record dates
- Find your overflow relief gully outside. It’s usually a round grate near the house. Keep it clear of soil, mulch and pot plants, so any sewage that backs up spills there instead of inside.
- Keep a record of each blockage, which fixtures were affected and what was done.
- Stop flushing wipes, and keep fats and oils out of your sinks.
- Take photos of any overflow or wet patches.
Why sewer work is not a DIY job, even when online guides suggest it is
Some online guides list PVC fixes and relining side by side, as if they sit on the same DIY scale. They don’t. In Victoria, sewer drainage work is licensed plumbing work. Before anyone starts, it’s reasonable to ask for their licence details and check them with the state’s plumbing regulator.
It also helps to know where your responsibility ends. As a general guide, the sewer pipes on your property are yours to look after up to where they connect to the public sewer. The exact boundary can vary from property to property, so check with your local water corporation. They can confirm where your section ends before you pay for any work.
Cutting, joining or lining those pipes yourself risks contamination and failed connections. It can also cause trouble when you come to sell. Your job is to record the symptoms, not to fix the line.
Frequently asked questions
How do I know if my sewer pipe needs replacing or just repairing?
Start with a CCTV camera inspection, because any advice to repair or replace should follow from the footage. A single minor issue can often be repaired in one spot. Damage across several sections, roots along the line or collapsed joints usually point to full replacement.
Does sewer replacement mean digging up my whole yard?
Not always. Trenchless methods let much of the work happen without digging up the entire line. Pipe pulling draws a new pipe through the old one, so trees and paving can often stay put. You’ll still need an open trench when the line has badly collapsed or access isn’t workable, and your plumber should explain why.
Is relining a repair or a replacement?
It sits between the two. Relining creates a new lining inside the existing pipe. It suits lines with cracks or minor root entry that still hold their shape, but it can’t fix a fully collapsed section.
My drain keeps blocking. Does that mean the sewer is broken?
Not necessarily. That said, recurring blockages are one of the most common reasons a line ends up repaired or replaced. Note how often it happens and which fixtures are affected, then book a camera inspection. Clearing the drain again and again without filming it can hide a fault that’s getting worse.
Can I repair a sewer pipe myself?
No. In Victoria, sewer work must be done by a licensed plumber. You can safely record symptoms, keep the overflow relief gully clear and avoid flushing wipes or fats. Anything that involves cutting, joining or relining needs a licensed professional.
Get the facts on camera before you sign a quote
If your drain keeps blocking, what you need next is footage, not a shovel. Fast N Local Plumbing is fully licensed and insured. We inspect sewer lines with a CCTV drain camera, so you can see the problem for yourself before you decide anything. All Our Work Guaranteed, and no job is ever completed till you are 100% satisfied.
We’ve looked after more than 5000 happy clients and hold a 4.9 rating from 44 Google reviews. We work across all Melbourne and surrounding suburbs, including Fitzroy, Brunswick, Camberwell and Mernda.
So before you agree to dig up your yard, ask one question: can you show me the footage? Then give us a call, and we’ll show you exactly what’s going on underground.


